WXMY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*
1787562878	29.5 degC	70 %	1009 hPa	14 kmh
1787561015	29.5 degC	71 %	1009 hPa	15 kmh
1787559153	30 degC	72 %	1009 hPa	16 kmh
1787557292	30 degC	70 %	1010 hPa	18 kmh
1787555428	30.5 degC	68 %	1010 hPa	19 kmh
1787553563	30.5 degC	68 %	1011 hPa	15 kmh
1787551696	31 degC	66 %	1011 hPa	14 kmh
1787549811	31 degC	65 %	1011 hPa	15 kmh
1787547949	31 degC	64 %	1011 hPa	15 kmh
1787546088	31 degC	62 %	1011 hPa	14 kmh
1787544229	31 degC	62 %	1012 hPa	13 kmh
1787542370	30.5 degC	64 %	1012 hPa	12 kmh
1787540512	30.5 degC	69 %	1012 hPa	10 kmh
1787538652	30 degC	73 %	1012 hPa	8 kmh
1787536786	29 degC	80 %	1012 hPa	4 kmh
1787534913	28 degC	84 %	1012 hPa	3 kmh
1787533054	27 degC	88 %	1011 hPa	4 kmh
1787531198	25.5 degC	91 %	1011 hPa	6 kmh
1787529341	25.5 degC	93 %	1011 hPa	5 kmh
1787527485	25 degC	94 %	1011 hPa	5 kmh
1787525615	25 degC	94 %	1010 hPa	4 kmh
1787523747	25.5 degC	91 %	1010 hPa	3 kmh
1787521875	26 degC	90 %	1010 hPa	3 kmh
1787519990	26.5 degC	87 %	1010 hPa	3 kmh
1787518120	26.5 degC	86 %	1010 hPa	4 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)