WXMY-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1782663191	24 degC	99 %	1012 hPa	2 kmh	0 mm
1782661331	24 degC	99 %	1011 hPa	6 kmh	0 mm
1782659471	24 degC	99 %	1011 hPa	9 kmh	0.1 mm
1782657609	24.5 degC	99 %	1011 hPa	6 kmh	0.1 mm
1782655745	24.5 degC	98 %	1011 hPa	1 kmh	0.1 mm
1782653861	25 degC	98 %	1011 hPa	2 kmh	0.1 mm
1782651993	24.5 degC	98 %	1010 hPa	4 kmh	0.1 mm
1782650126	24.5 degC	98 %	1010 hPa	4 kmh	0.1 mm
1782648264	24.5 degC	98 %	1009 hPa	4 kmh	0.1 mm
1782646398	25 degC	98 %	1009 hPa	6 kmh	0.1 mm
1782644536	25.5 degC	97 %	1008 hPa	7 kmh	0.1 mm
1782642675	25.5 degC	97 %	1008 hPa	7 kmh	0.1 mm
1782640810	26 degC	97 %	1008 hPa	6 kmh	0.2 mm
1782638920	26.5 degC	98 %	1008 hPa	6 kmh	0.2 mm
1782637054	26.5 degC	97 %	1008 hPa	5 kmh	0.1 mm
1782635192	26.5 degC	97 %	1008 hPa	1 kmh	0.1 mm
1782633330	26.5 degC	92 %	1008 hPa	3 kmh	0 mm
1782631467	26.5 degC	92 %	1009 hPa	5 kmh	0 mm
1782629605	26.5 degC	90 %	1009 hPa	7 kmh	0.3 mm
1782627741	27 degC	88 %	1010 hPa	8 kmh	0.3 mm
1782625882	27.5 degC	83 %	1010 hPa	7 kmh	0.1 mm
1782624000	29 degC	75 %	1010 hPa	4 kmh	0.1 mm
1782622136	29.5 degC	73 %	1010 hPa	2 kmh	0 mm
1782620276	29.5 degC	75 %	1010 hPa	0 kmh	0 mm
1782618417	29 degC	77 %	1011 hPa	0 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)