WXMY-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1782657613	25 degC	95 %	1012 hPa	4 kmh	0.1 mm
1782655749	25 degC	93 %	1011 hPa	6 kmh	0 mm
1782653867	25.5 degC	93 %	1010 hPa	7 kmh	0 mm
1782651997	25.5 degC	93 %	1010 hPa	6 kmh	0 mm
1782650130	26 degC	92 %	1009 hPa	4 kmh	0 mm
1782648268	26 degC	91 %	1009 hPa	3 kmh	0 mm
1782646403	26 degC	90 %	1008 hPa	2 kmh	0 mm
1782644541	26 degC	88 %	1008 hPa	2 kmh	0 mm
1782642678	26.5 degC	86 %	1008 hPa	1 kmh	0 mm
1782640816	26.5 degC	85 %	1008 hPa	3 kmh	0.1 mm
1782638926	26.5 degC	86 %	1008 hPa	6 kmh	0.1 mm
1782637058	27.5 degC	82 %	1008 hPa	7 kmh	0.2 mm
1782635196	28.5 degC	74 %	1007 hPa	4 kmh	0.2 mm
1782633334	28.5 degC	76 %	1008 hPa	3 kmh	0.1 mm
1782631471	29 degC	73 %	1008 hPa	1 kmh	0.1 mm
1782629609	29 degC	72 %	1009 hPa	3 kmh	0.1 mm
1782627745	29 degC	71 %	1009 hPa	8 kmh	0.1 mm
1782625886	30 degC	68 %	1010 hPa	9 kmh	0 mm
1782624009	31 degC	63 %	1010 hPa	6 kmh	0 mm
1782622140	31.5 degC	62 %	1010 hPa	5 kmh	0 mm
1782620280	31 degC	62 %	1010 hPa	5 kmh	0 mm
1782618421	30.5 degC	64 %	1010 hPa	3 kmh	0 mm
1782616562	28.5 degC	72 %	1011 hPa	4 kmh	0 mm
1782614704	28 degC	76 %	1011 hPa	3 kmh	0 mm
1782612842	26 degC	85 %	1011 hPa	2 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)