WXMY-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1787566639	33 degC	40 %	1008 hPa	7 kmh	0 mm
1787564764	33.5 degC	39 %	1008 hPa	8 kmh	0 mm
1787562893	34 degC	39 %	1008 hPa	9 kmh	0 mm
1787561031	34 degC	40 %	1008 hPa	10 kmh	0 mm
1787559169	34 degC	40 %	1009 hPa	10 kmh	0.1 mm
1787557308	34 degC	40 %	1009 hPa	10 kmh	0.1 mm
1787555445	34.5 degC	40 %	1009 hPa	10 kmh	0 mm
1787553580	34.5 degC	39 %	1010 hPa	11 kmh	0 mm
1787551714	34.5 degC	41 %	1010 hPa	11 kmh	0 mm
1787549841	34 degC	43 %	1011 hPa	11 kmh	0 mm
1787547964	34 degC	44 %	1011 hPa	11 kmh	0 mm
1787546103	33.5 degC	46 %	1011 hPa	11 kmh	0 mm
1787544245	33 degC	48 %	1012 hPa	10 kmh	0 mm
1787542386	32.5 degC	52 %	1012 hPa	10 kmh	0 mm
1787540527	31.5 degC	57 %	1012 hPa	9 kmh	0 mm
1787538668	31 degC	60 %	1013 hPa	9 kmh	0 mm
1787534932	29 degC	67 %	1013 hPa	7 kmh	0 mm
1787533069	28 degC	70 %	1012 hPa	6 kmh	0 mm
1787531213	27 degC	74 %	1012 hPa	7 kmh	0 mm
1787529356	26.5 degC	75 %	1011 hPa	6 kmh	0 mm
1787527500	26.5 degC	75 %	1011 hPa	6 kmh	0 mm
1787525630	26.5 degC	76 %	1011 hPa	6 kmh	0 mm
1787523771	26.5 degC	76 %	1011 hPa	6 kmh	0 mm
1787520011	26.5 degC	75 %	1010 hPa	6 kmh	0 mm
1787518135	26.5 degC	74 %	1010 hPa	6 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)