WXMY-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1778735368	31 degC	70 %	1009 hPa	4 kmh	0 mm
1778733503	30.5 degC	72 %	1009 hPa	4 kmh	0 mm
1778731641	29.5 degC	74 %	1010 hPa	3 kmh	0 mm
1778729780	29 degC	77 %	1010 hPa	2 kmh	0 mm
1778727913	28 degC	81 %	1010 hPa	0 kmh	0 mm
1778726052	27.5 degC	83 %	1010 hPa	1 kmh	0 mm
1778724192	27.5 degC	84 %	1010 hPa	3 kmh	0 mm
1778722329	27 degC	86 %	1010 hPa	3 kmh	0 mm
1778720470	26.5 degC	89 %	1009 hPa	3 kmh	0 mm
1778718592	25.5 degC	92 %	1009 hPa	4 kmh	0 mm
1778716732	24 degC	99 %	1009 hPa	7 kmh	0.2 mm
1778714873	23.5 degC	99 %	1009 hPa	8 kmh	0.2 mm
1778713009	24 degC	97 %	1008 hPa	8 kmh	0.2 mm
1778711150	24.5 degC	94 %	1008 hPa	6 kmh	0.2 mm
1778709293	25 degC	93 %	1007 hPa	5 kmh	0 mm
1778707433	25.5 degC	93 %	1007 hPa	3 kmh	0 mm
1778705576	25.5 degC	92 %	1007 hPa	2 kmh	0 mm
1778703713	25.5 degC	93 %	1007 hPa	2 kmh	0 mm
1778701853	25.5 degC	93 %	1007 hPa	1 kmh	0 mm
1778699987	25.5 degC	92 %	1007 hPa	1 kmh	0 mm
1778698122	24.5 degC	96 %	1008 hPa	0 kmh	0 mm
1778696263	24.5 degC	97 %	1008 hPa	1 kmh	0 mm
1778694406	24.5 degC	98 %	1009 hPa	2 kmh	0 mm
1778692546	24.5 degC	97 %	1009 hPa	3 kmh	0 mm
1778690688	24.5 degC	97 %	1010 hPa	4 kmh	0.1 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)