WXMY-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*
1787566648	32 degC	52 %	1008 hPa	10 kmh
1787564774	32.5 degC	50 %	1008 hPa	10 kmh
1787562901	33 degC	49 %	1008 hPa	10 kmh
1787561039	33 degC	50 %	1009 hPa	10 kmh
1787559177	33 degC	51 %	1009 hPa	11 kmh
1787557330	33 degC	52 %	1009 hPa	11 kmh
1787555453	33 degC	53 %	1010 hPa	12 kmh
1787553587	32.5 degC	55 %	1010 hPa	15 kmh
1787551724	32.5 degC	55 %	1011 hPa	15 kmh
1787549850	32.5 degC	54 %	1011 hPa	15 kmh
1787547972	33 degC	54 %	1012 hPa	15 kmh
1787546111	32.5 degC	55 %	1012 hPa	14 kmh
1787544252	32.5 degC	57 %	1012 hPa	13 kmh
1787542393	32 degC	59 %	1012 hPa	12 kmh
1787540535	31.5 degC	60 %	1013 hPa	10 kmh
1787538676	31 degC	63 %	1013 hPa	8 kmh
1787536958	30 degC	65 %	1013 hPa	6 kmh
1787534941	28 degC	70 %	1013 hPa	7 kmh
1787533077	27 degC	73 %	1012 hPa	8 kmh
1787531220	25.5 degC	76 %	1012 hPa	8 kmh
1787529364	25 degC	78 %	1012 hPa	9 kmh
1787527507	24.5 degC	77 %	1011 hPa	9 kmh
1787525637	25 degC	76 %	1011 hPa	9 kmh
1787523778	25.5 degC	73 %	1011 hPa	8 kmh
1787521911	26 degC	72 %	1011 hPa	8 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)