WXMY-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*
1787568524	30 degC	64 %	1009 hPa	11 kmh
1787566652	30.5 degC	60 %	1009 hPa	12 kmh
1787564779	31 degC	58 %	1009 hPa	13 kmh
1787562906	31.5 degC	56 %	1009 hPa	13 kmh
1787561043	32 degC	55 %	1009 hPa	15 kmh
1787559181	32 degC	54 %	1009 hPa	15 kmh
1787557333	32.5 degC	53 %	1009 hPa	15 kmh
1787555457	32.5 degC	53 %	1010 hPa	14 kmh
1787553591	32.5 degC	53 %	1010 hPa	15 kmh
1787551728	32.5 degC	53 %	1010 hPa	14 kmh
1787549856	32.5 degC	53 %	1011 hPa	13 kmh
1787547976	32.5 degC	53 %	1011 hPa	13 kmh
1787546115	32.5 degC	54 %	1012 hPa	13 kmh
1787544256	32 degC	56 %	1012 hPa	12 kmh
1787542397	31.5 degC	59 %	1012 hPa	11 kmh
1787540539	31 degC	63 %	1013 hPa	11 kmh
1787538680	30.5 degC	68 %	1013 hPa	10 kmh
1787536958	29.5 degC	72 %	1013 hPa	9 kmh
1787534947	28.5 degC	79 %	1013 hPa	8 kmh
1787533081	27.5 degC	85 %	1012 hPa	7 kmh
1787531224	26 degC	90 %	1012 hPa	5 kmh
1787529367	26 degC	92 %	1012 hPa	6 kmh
1787527511	25.5 degC	93 %	1011 hPa	6 kmh
1787525642	25 degC	94 %	1011 hPa	6 kmh
1787523782	25 degC	94 %	1011 hPa	6 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)