WXMY-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*
1787566657	30 degC	72 %	1008 hPa	16 kmh
1787564784	30 degC	71 %	1008 hPa	15 kmh
1787562910	30.5 degC	70 %	1008 hPa	14 kmh
1787561047	30.5 degC	68 %	1008 hPa	15 kmh
1787559185	30.5 degC	66 %	1008 hPa	16 kmh
1787557337	31 degC	62 %	1009 hPa	17 kmh
1787555461	31.5 degC	58 %	1009 hPa	17 kmh
1787553599	32 degC	54 %	1009 hPa	14 kmh
1787551732	32.5 degC	53 %	1010 hPa	11 kmh
1787549862	32.5 degC	47 %	1010 hPa	10 kmh
1787547981	33 degC	43 %	1011 hPa	9 kmh
1787546119	32.5 degC	42 %	1011 hPa	8 kmh
1787544260	32 degC	44 %	1012 hPa	8 kmh
1787542401	31.5 degC	48 %	1012 hPa	9 kmh
1787540543	30.5 degC	53 %	1012 hPa	9 kmh
1787538684	30 degC	59 %	1013 hPa	9 kmh
1787536958	29 degC	65 %	1013 hPa	9 kmh
1787534952	28 degC	71 %	1012 hPa	10 kmh
1787533084	27 degC	75 %	1012 hPa	10 kmh
1787531227	26.5 degC	80 %	1012 hPa	9 kmh
1787529371	26 degC	83 %	1011 hPa	8 kmh
1787527515	25.5 degC	84 %	1011 hPa	8 kmh
1787525648	25.5 degC	84 %	1011 hPa	8 kmh
1787523786	25.5 degC	85 %	1011 hPa	8 kmh
1787521918	25.5 degC	85 %	1010 hPa	8 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)