WXMY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1787564791	30.5 degC	72 %	1008 hPa	6 kmh	0 mm
1787562915	30.5 degC	70 %	1008 hPa	7 kmh	0 mm
1787561052	30.5 degC	72 %	1008 hPa	7 kmh	0 mm
1787559189	30.5 degC	74 %	1008 hPa	7 kmh	0.1 mm
1787557338	30.5 degC	75 %	1009 hPa	8 kmh	0.1 mm
1787555465	30.5 degC	74 %	1009 hPa	9 kmh	0.1 mm
1787553603	32.5 degC	60 %	1009 hPa	5 kmh	0 mm
1787551737	32.5 degC	58 %	1010 hPa	3 kmh	0 mm
1787549865	32.5 degC	58 %	1010 hPa	2 kmh	0 mm
1787547985	32.5 degC	59 %	1010 hPa	1 kmh	0 mm
1787546123	32 degC	62 %	1011 hPa	2 kmh	0 mm
1787544264	31.5 degC	65 %	1011 hPa	3 kmh	0 mm
1787542405	31 degC	68 %	1011 hPa	4 kmh	0 mm
1787540547	30.5 degC	72 %	1012 hPa	5 kmh	0 mm
1787538687	30 degC	75 %	1012 hPa	5 kmh	0 mm
1787536958	29.5 degC	79 %	1012 hPa	6 kmh	0 mm
1787534956	28 degC	85 %	1012 hPa	6 kmh	0 mm
1787533088	27.5 degC	88 %	1011 hPa	6 kmh	0 mm
1787531231	26.5 degC	91 %	1011 hPa	7 kmh	0 mm
1787529375	25.5 degC	93 %	1011 hPa	7 kmh	0 mm
1787527518	25 degC	94 %	1011 hPa	6 kmh	0 mm
1787523790	25 degC	94 %	1010 hPa	6 kmh	0 mm
1787521923	25.5 degC	93 %	1010 hPa	6 kmh	0 mm
1787518164	25.5 degC	93 %	1010 hPa	7 kmh	0 mm
1787516294	26 degC	92 %	1010 hPa	7 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)