WXMY-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1787566673	30 degC	78 %	1008 hPa	11 kmh	0 mm
1787564796	30 degC	76 %	1008 hPa	11 kmh	0 mm
1787562922	30.5 degC	74 %	1008 hPa	10 kmh	0 mm
1787561056	31 degC	72 %	1008 hPa	11 kmh	0 mm
1787559193	31 degC	70 %	1008 hPa	11 kmh	0 mm
1787555469	31.5 degC	65 %	1009 hPa	7 kmh	0.1 mm
1787553607	31 degC	67 %	1009 hPa	9 kmh	0 mm
1787551741	31.5 degC	64 %	1010 hPa	7 kmh	0.1 mm
1787549871	32 degC	62 %	1010 hPa	5 kmh	0.1 mm
1787547990	32 degC	61 %	1011 hPa	2 kmh	0 mm
1787546127	31.5 degC	64 %	1011 hPa	1 kmh	0 mm
1787544268	31 degC	67 %	1011 hPa	1 kmh	0 mm
1787542409	31 degC	69 %	1011 hPa	1 kmh	0 mm
1787540550	30.5 degC	71 %	1012 hPa	3 kmh	0 mm
1787538691	30 degC	75 %	1012 hPa	4 kmh	0 mm
1787536959	29 degC	80 %	1012 hPa	5 kmh	0 mm
1787534961	27.5 degC	88 %	1012 hPa	5 kmh	0 mm
1787533092	26.5 degC	92 %	1011 hPa	5 kmh	0 mm
1787531235	26 degC	94 %	1011 hPa	6 kmh	0 mm
1787529378	25.5 degC	97 %	1011 hPa	5 kmh	0 mm
1787527522	25 degC	98 %	1010 hPa	6 kmh	0 mm
1787525665	25 degC	98 %	1010 hPa	6 kmh	0 mm
1787523794	25 degC	98 %	1010 hPa	5 kmh	0 mm
1787521926	25 degC	98 %	1010 hPa	5 kmh	0 mm
1787520048	25 degC	98 %	1010 hPa	5 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)