WXMY-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1782663230	25.5 degC	82 %	1010 hPa	7 kmh	0 mm
1782661370	25.5 degC	83 %	1010 hPa	8 kmh	0 mm
1782659511	26 degC	84 %	1010 hPa	7 kmh	0 mm
1782657650	26 degC	84 %	1010 hPa	6 kmh	0 mm
1782655785	26.5 degC	85 %	1010 hPa	4 kmh	0 mm
1782653919	26.5 degC	85 %	1009 hPa	3 kmh	0 mm
1782652035	27 degC	85 %	1009 hPa	2 kmh	0 mm
1782650171	27 degC	84 %	1009 hPa	2 kmh	0 mm
1782648305	27.5 degC	83 %	1009 hPa	2 kmh	0 mm
1782646443	27.5 degC	84 %	1008 hPa	1 kmh	0 mm
1782644577	27.5 degC	83 %	1008 hPa	1 kmh	0 mm
1782642715	28 degC	81 %	1008 hPa	2 kmh	0 mm
1782640855	28.5 degC	77 %	1008 hPa	3 kmh	0 mm
1782638976	29 degC	71 %	1007 hPa	3 kmh	0 mm
1782637095	29.5 degC	69 %	1007 hPa	2 kmh	0 mm
1782635233	29.5 degC	69 %	1007 hPa	3 kmh	0 mm
1782633371	29.5 degC	69 %	1007 hPa	2 kmh	0 mm
1782631507	29 degC	72 %	1008 hPa	4 kmh	0 mm
1782629646	28.5 degC	76 %	1008 hPa	7 kmh	0.1 mm
1782627783	28 degC	81 %	1008 hPa	9 kmh	0.1 mm
1782625920	28 degC	77 %	1009 hPa	6 kmh	0.2 mm
1782624059	29.5 degC	67 %	1009 hPa	2 kmh	0.2 mm
1782622175	30.5 degC	63 %	1009 hPa	6 kmh	0 mm
1782620315	30.5 degC	64 %	1010 hPa	5 kmh	0 mm
1782618456	31 degC	65 %	1010 hPa	5 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)