WXMY-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1787566687	27.5 degC	92 %	1010 hPa	7 kmh	0 mm
1787564811	27.5 degC	92 %	1009 hPa	5 kmh	0.1 mm
1787562934	27.5 degC	93 %	1009 hPa	4 kmh	0.1 mm
1787561069	29.5 degC	75 %	1008 hPa	3 kmh	0.3 mm
1787559206	31.5 degC	63 %	1008 hPa	9 kmh	0 mm
1787555481	33 degC	57 %	1008 hPa	10 kmh	0 mm
1787553619	34.5 degC	54 %	1008 hPa	11 kmh	0 mm
1787551755	34 degC	57 %	1009 hPa	11 kmh	0 mm
1787549886	33.5 degC	58 %	1009 hPa	11 kmh	0 mm
1787548001	33.5 degC	59 %	1010 hPa	10 kmh	0 mm
1787546141	33 degC	61 %	1011 hPa	9 kmh	0 mm
1787544279	32.5 degC	63 %	1011 hPa	9 kmh	0 mm
1787542421	32 degC	65 %	1012 hPa	9 kmh	0 mm
1787540562	31 degC	68 %	1012 hPa	9 kmh	0 mm
1787538704	30.5 degC	70 %	1012 hPa	8 kmh	0 mm
1787536959	29.5 degC	74 %	1013 hPa	8 kmh	0 mm
1787534976	28 degC	85 %	1013 hPa	8 kmh	0 mm
1787533103	27 degC	90 %	1012 hPa	7 kmh	0 mm
1787531246	26.5 degC	93 %	1012 hPa	6 kmh	0 mm
1787529390	26 degC	94 %	1012 hPa	6 kmh	0 mm
1787527533	25.5 degC	97 %	1011 hPa	6 kmh	0 mm
1787525677	25 degC	98 %	1011 hPa	7 kmh	0 mm
1787523807	25 degC	98 %	1011 hPa	7 kmh	0 mm
1787521939	25 degC	97 %	1011 hPa	7 kmh	0 mm
1787520065	25.5 degC	96 %	1010 hPa	8 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)