WXMY-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WXMY-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1787570419	29.5 degC	76 %	1009 hPa	11 kmh	0 mm
1787568557	29.5 degC	77 %	1009 hPa	11 kmh	0 mm
1787566691	29.5 degC	76 %	1009 hPa	11 kmh	0 mm
1787564816	29.5 degC	76 %	1009 hPa	11 kmh	0 mm
1787562938	30 degC	74 %	1008 hPa	12 kmh	0 mm
1787561073	30.5 degC	73 %	1008 hPa	15 kmh	0 mm
1787559211	30.5 degC	73 %	1008 hPa	16 kmh	0 mm
1787555485	31 degC	70 %	1008 hPa	20 kmh	0 mm
1787553624	31 degC	68 %	1008 hPa	18 kmh	0 mm
1787551759	31 degC	69 %	1009 hPa	17 kmh	0 mm
1787549891	31 degC	70 %	1009 hPa	16 kmh	0 mm
1787548005	31.5 degC	69 %	1010 hPa	16 kmh	0 mm
1787546145	31.5 degC	67 %	1010 hPa	16 kmh	0 mm
1787544283	31.5 degC	64 %	1011 hPa	15 kmh	0.1 mm
1787542425	31.5 degC	64 %	1011 hPa	14 kmh	0.1 mm
1787540566	31.5 degC	64 %	1011 hPa	14 kmh	0 mm
1787538707	31 degC	66 %	1011 hPa	13 kmh	0 mm
1787536959	30.5 degC	68 %	1012 hPa	13 kmh	0 mm
1787534982	30 degC	71 %	1012 hPa	14 kmh	0 mm
1787533107	29.5 degC	73 %	1011 hPa	14 kmh	0 mm
1787531250	29.5 degC	75 %	1011 hPa	13 kmh	0 mm
1787529393	29.5 degC	75 %	1011 hPa	12 kmh	0 mm
1787527537	29 degC	80 %	1010 hPa	12 kmh	0 mm
1787525681	28.5 degC	81 %	1010 hPa	12 kmh	0 mm
1787523811	28.5 degC	79 %	1010 hPa	10 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)