W4BOC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W4BOC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Ibat*	SoC*	Tbat*	IchgO*
1784690264	14.4 Vdc	-4 Adc	100 Pct	23 degC	0.8 Adc
1784689664	14.4 Vdc	5 Adc	100 Pct	23 degC	0 Adc
1784689063	14.4 Vdc	1 Adc	100 Pct	23 degC	0 Adc
1784688463	14.4 Vdc	4 Adc	100 Pct	23 degC	4.8 Adc
1784687863	14.4 Vdc	4 Adc	100 Pct	23 degC	0.2 Adc
1784687263	14.4 Vdc	0 Adc	100 Pct	23 degC	1.2 Adc
1784686816	14.4 Vdc	-3 Adc	100 Pct	23 degC	0.2 Adc
1784686216	14.4 Vdc	-3 Adc	100 Pct	22.5 degC	5.6 Adc
1784685616	14.3 Vdc	-4 Adc	100 Pct	22.5 degC	4.8 Adc
1784685016	14.4 Vdc	0 Adc	100 Pct	22.5 degC	1.6 Adc
1784684416	14.4 Vdc	-3 Adc	100 Pct	22.5 degC	2.8 Adc
1784683816	14.4 Vdc	1 Adc	100 Pct	22.5 degC	5.2 Adc
1784683211	14.4 Vdc	1 Adc	100 Pct	22.5 degC	4.8 Adc
1784682611	14.3 Vdc	15 Adc	100 Pct	22.5 degC	23.2 Adc
1784682011	14.3 Vdc	-2 Adc	100 Pct	22.5 degC	4.8 Adc
1784681411	14.4 Vdc	-3 Adc	100 Pct	22.5 degC	4 Adc
1784680811	14.4 Vdc	-2 Adc	100 Pct	22.5 degC	6.8 Adc
1784680746	14.4 Vdc	4 Adc	100 Pct	22.5 degC	1 Adc
1784680211	14.4 Vdc	-5 Adc	100 Pct	22.5 degC	4.8 Adc
1784679606	14.4 Vdc	0 Adc	100 Pct	22.5 degC	4.4 Adc
1784679006	14.4 Vdc	1 Adc	100 Pct	22.5 degC	0 Adc
1784678406	14.4 Vdc	4 Adc	100 Pct	22.5 degC	5.2 Adc
1784677806	14.4 Vdc	-1 Adc	100 Pct	22.5 degC	0 Adc
1784677206	14.4 Vdc	0 Adc	100 Pct	22.5 degC	5.2 Adc
1784676606	14.4 Vdc	1 Adc	100 Pct	22.5 degC	4.2 Adc

*Used Equation Coefficients:

Vbat: 0, 0.1, 0

Ibat: 0, 1, -128

SoC: 0, 1, 0

Tbat: 0, 0.5, -20

IchgO: 0, 0.2, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)