OK1VIG-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1788565346	772 Count	443 Count	64 Count	4.12 VDC	0.14 VDC
1788561741	771 Count	443 Count	64 Count	4.2 VDC	0.14 VDC
1788558136	770 Count	443 Count	64 Count	4.11 VDC	0.14 VDC
1788554562	769 Count	443 Count	64 Count	4.21 VDC	0.14 VDC
1788550957	768 Count	443 Count	64 Count	4.2 VDC	0.14 VDC
1788547351	767 Count	443 Count	64 Count	4.19 VDC	0.14 VDC
1788543754	766 Count	443 Count	64 Count	4.19 VDC	0.14 VDC
1788540141	765 Count	443 Count	64 Count	4.15 VDC	0.14 VDC
1788536536	764 Count	443 Count	64 Count	4.14 VDC	0.14 VDC
1788532960	763 Count	443 Count	64 Count	4.15 VDC	0.14 VDC
1788529355	762 Count	443 Count	64 Count	4.18 VDC	0.14 VDC
1788525750	761 Count	443 Count	64 Count	4.12 VDC	0.14 VDC
1788522145	760 Count	443 Count	64 Count	4.18 VDC	0.14 VDC
1788518539	759 Count	443 Count	64 Count	4.15 VDC	0.14 VDC
1788514934	758 Count	443 Count	64 Count	4.18 VDC	0.14 VDC
1788511360	757 Count	443 Count	64 Count	4.12 VDC	0.14 VDC
1788507754	756 Count	443 Count	64 Count	4.19 VDC	0.14 VDC
1788504149	755 Count	443 Count	64 Count	4.2 VDC	0.14 VDC
1788500544	754 Count	443 Count	64 Count	4.2 VDC	0.14 VDC
1788496939	753 Count	443 Count	64 Count	4.2 VDC	0.14 VDC
1788493334	752 Count	443 Count	64 Count	4.18 VDC	0.14 VDC
1788489759	751 Count	443 Count	64 Count	4.16 VDC	0.14 VDC
1788486154	750 Count	443 Count	64 Count	4.14 VDC	0.14 VDC
1788482549	749 Count	443 Count	64 Count	4.15 VDC	0.14 VDC
1788478943	748 Count	443 Count	64 Count	4.19 VDC	0.14 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)