TA2BZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2BZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1775566694	25 Count	0 Count	0 Count	0 VDC	0 VDC
1775564894	24 Count	0 Count	0 Count	0 VDC	0 VDC
1775563093	23 Count	0 Count	0 Count	0 VDC	0 VDC
1775561295	22 Count	0 Count	0 Count	0 VDC	0 VDC
1775560449	21 Count	0 Count	0 Count	0 VDC	0 VDC
1775560429	20 Count	0 Count	0 Count	0 VDC	0 VDC
1775558598	18 Count	0 Count	0 Count	0 VDC	0 VDC
1775554370	15 Count	0 Count	0 Count	0 VDC	0 VDC
1775554311	14 Count	0 Count	0 Count	0 VDC	0 VDC
1775554279	13 Count	0 Count	0 Count	0 VDC	0 VDC
1775554259	12 Count	0 Count	0 Count	0 VDC	0 VDC
1775554235	11 Count	0 Count	0 Count	0 VDC	0 VDC
1775554042	10 Count	0 Count	0 Count	0 VDC	0 VDC
1775552690	9 Count	0 Count	0 Count	0 VDC	0 VDC
1775550889	8 Count	0 Count	0 Count	0 VDC	0 VDC
1775549089	7 Count	0 Count	0 Count	0 VDC	0 VDC
1775547288	6 Count	0 Count	0 Count	0 VDC	0 VDC
1775545488	5 Count	0 Count	0 Count	0 VDC	0 VDC
1775545481	4 Count	0 Count	0 Count	0 VDC	0 VDC
1775545453	2 Count	0 Count	0 Count	0 VDC	0 VDC
1775545412	1 Count	0 Count	0 Count	0 VDC	0 VDC
1775545408	0 Count	0 Count	0 Count	0 VDC	0 VDC
1775490097	22 Count	0 Count	0 Count	0 VDC	0 VDC
1775490093	21 Count	0 Count	0 Count	0 VDC	0 VDC
1775489882	19 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)