IK8WTD-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK8WTD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Vsolar*	Dg1h*	Eff1h*	Temp*
1784691593	12.4 Volt	12.4 Volt	20 Pkt	73 Pcnt	24.5 C
1784690692	12.4 Volt	1.3 Volt	20 Pkt	71 Pcnt	24.5 C
1784689792	12.3 Volt	1 Volt	20 Pkt	56 Pcnt	24.5 C
1784688891	12.4 Volt	1 Volt	20 Pkt	38 Pcnt	24.5 C
1784687991	12.5 Volt	1 Volt	20 Pkt	25 Pcnt	25 C
1784687089	12.5 Volt	1 Volt	20 Pkt	18 Pcnt	25 C
1784686188	12.5 Volt	1 Volt	20 Pkt	17 Pcnt	25.5 C
1784685287	12.5 Volt	1 Volt	10 Pkt	15 Pcnt	26 C
1784684387	12.3 Volt	1 Volt	10 Pkt	17 Pcnt	26 C
1784683486	12.5 Volt	1 Volt	10 Pkt	25 Pcnt	26 C
1784682585	12.5 Volt	1 Volt	10 Pkt	32 Pcnt	26 C
1784681684	12.5 Volt	1 Volt	10 Pkt	43 Pcnt	26 C
1784680783	12.5 Volt	1 Volt	10 Pkt	56 Pcnt	26 C
1784679882	12.5 Volt	1 Volt	0 Pkt	51 Pcnt	26 C
1784678981	12.5 Volt	1 Volt	0 Pkt	51 Pcnt	26.5 C
1784678080	12.5 Volt	1 Volt	0 Pkt	47 Pcnt	26.5 C
1784677179	12.6 Volt	1 Volt	0 Pkt	41 Pcnt	27 C
1784676279	12.6 Volt	1 Volt	10 Pkt	35 Pcnt	27 C
1784675378	12.6 Volt	1 Volt	10 Pkt	37 Pcnt	27 C
1784674477	12.6 Volt	1 Volt	10 Pkt	37 Pcnt	27 C
1784673576	12.6 Volt	1 Volt	10 Pkt	42 Pcnt	27 C
1784672675	12.6 Volt	1 Volt	10 Pkt	52 Pcnt	27.5 C
1784671774	12.6 Volt	1 Volt	10 Pkt	30 Pcnt	27.5 C
1784670873	12.6 Volt	1 Volt	10 Pkt	24 Pcnt	27.5 C
1784669973	12.6 Volt	1 Volt	10 Pkt	20 Pcnt	28 C

*Used Equation Coefficients:

Vin: 0, 0.1, 0

Vsolar: 0, 0.1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)