SR2JAR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2JAR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1789951201	40 Deg.C	2 %
1789950605	42 Deg.C	2 %
1789950001	40 Deg.C	2 %
1789949402	40 Deg.C	2 %
1789948805	40 Deg.C	2 %
1789948201	40 Deg.C	2 %
1789947605	40 Deg.C	2 %
1789947001	40 Deg.C	2 %
1789946405	41 Deg.C	2 %
1789945802	41 Deg.C	2 %
1789945201	41 Deg.C	2 %
1789944605	42 Deg.C	2 %
1789944001	40 Deg.C	2 %
1789943405	41 Deg.C	2 %
1789942802	41 Deg.C	2 %
1789942205	41 Deg.C	2 %
1789941602	41 Deg.C	2 %
1789941001	39 Deg.C	2 %
1789940405	40 Deg.C	2 %
1789939801	40 Deg.C	2 %
1789939205	41 Deg.C	2 %
1789938602	41 Deg.C	2 %
1789938005	41 Deg.C	2 %
1789937402	40 Deg.C	2 %
1789936801	41 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)