IZ2XCK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ2XCK-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1776644973	1 Pkt/10m	0 Pkt/10m	4.04 Volt	12.5 Volt	3.83 Ampere
1776643770	1 Pkt/10m	0 Pkt/10m	4.1 Volt	12.5 Volt	3.83 Ampere
1776642567	1 Pkt/10m	0 Pkt/10m	4 Volt	12.5 Volt	3.83 Ampere
1776641364	0 Pkt/10m	0 Pkt/10m	4.04 Volt	12.5 Volt	3.83 Ampere
1776640160	0 Pkt/10m	0 Pkt/10m	4.04 Volt	12.6 Volt	3.83 Ampere
1776638957	0 Pkt/10m	0 Pkt/10m	4.12 Volt	12.6 Volt	3.83 Ampere
1776637754	1 Pkt/10m	0 Pkt/10m	4.08 Volt	12.6 Volt	3.83 Ampere
1776636551	1 Pkt/10m	0 Pkt/10m	3.98 Volt	12.6 Volt	3.83 Ampere
1776635347	1 Pkt/10m	0 Pkt/10m	4 Volt	12.6 Volt	3.83 Ampere
1776634144	0 Pkt/10m	0 Pkt/10m	4.12 Volt	12.6 Volt	3.83 Ampere
1776632941	0 Pkt/10m	0 Pkt/10m	4 Volt	12.6 Volt	3.73 Ampere
1776631738	1 Pkt/10m	0 Pkt/10m	4 Volt	12.6 Volt	3.73 Ampere
1776630535	1 Pkt/10m	0 Pkt/10m	3.98 Volt	12.6 Volt	3.93 Ampere
1776629331	1 Pkt/10m	0 Pkt/10m	4.02 Volt	12.6 Volt	3.83 Ampere
1776628128	1 Pkt/10m	0 Pkt/10m	4.04 Volt	12.6 Volt	3.83 Ampere
1776626925	1 Pkt/10m	0 Pkt/10m	4.14 Volt	12.6 Volt	3.83 Ampere
1776625722	0 Pkt/10m	0 Pkt/10m	3.96 Volt	12.6 Volt	12.03 Ampere
1776624519	1 Pkt/10m	0 Pkt/10m	4.14 Volt	12.6 Volt	3.93 Ampere
1776623315	0 Pkt/10m	0 Pkt/10m	4 Volt	12.6 Volt	3.83 Ampere
1776622113	2 Pkt/10m	0 Pkt/10m	4.02 Volt	12.6 Volt	3.73 Ampere
1776620909	2 Pkt/10m	0 Pkt/10m	4.06 Volt	12.6 Volt	3.63 Ampere
1776619706	1 Pkt/10m	0 Pkt/10m	4.14 Volt	12.6 Volt	3.43 Ampere
1776618503	1 Pkt/10m	0 Pkt/10m	4.12 Volt	12.6 Volt	3.53 Ampere
1776617299	1 Pkt/10m	0 Pkt/10m	4.1 Volt	12.7 Volt	3.43 Ampere
1776616096	1 Pkt/10m	0 Pkt/10m	4.1 Volt	12.7 Volt	3.13 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.1, -10.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)