VE2CLT-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE2CLT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	24-12*	Batt*	Temp*	Intrusion*	Hydro*
1784708577	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784708427	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784708290	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784708127	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784707977	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784707827	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784707678	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784707527	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784707377	13.6 V	27.14 V	28.84 degC	0.21 0/1	0.37 0/1
1784707227	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784707077	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784706927	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784706780	13.6 V	27.14 V	28.84 degC	0.21 0/1	0.37 0/1
1784706631	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784706483	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784706177	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784706033	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784705877	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784705727	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784705577	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784705427	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784705277	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784705127	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784704977	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1
1784704828	13.6 V	27.14 V	28.84 degC	0.22 0/1	0.37 0/1

*Used Equation Coefficients:

24-12: 0, 0.05887, 0

Batt: 0, 0.1165, 0

Temp: 0, 1.961, -273.15

Intrusion: 0, 0.00416, 0

Hydro: 0, 0.00416, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)