K7SWI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K7SWI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784715348	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	7 count/10m
1784714164	0.02 Rx Erlang	0 Tx Erlang	21 count/10m	0 count/10m	5 count/10m
1784708147	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	6 count/10m
1784706948	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	6 count/10m
1784705840	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	7 count/10m
1784704546	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	6 count/10m
1784698547	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	7 count/10m
1784688946	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	6 count/10m
1784686587	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	5 count/10m
1784685346	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	6 count/10m
1784682949	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	0 count/10m	6 count/10m
1784681746	0.02 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	8 count/10m
1784679346	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	8 count/10m
1784678161	0.02 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	11 count/10m
1784677056	0.03 Rx Erlang	0.01 Tx Erlang	32 count/10m	0 count/10m	13 count/10m
1784674552	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	6 count/10m
1784669747	0.03 Rx Erlang	0.02 Tx Erlang	33 count/10m	0 count/10m	14 count/10m
1784668546	0.02 Rx Erlang	0 Tx Erlang	18 count/10m	0 count/10m	5 count/10m
1784667358	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	0 count/10m	7 count/10m
1784664949	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	6 count/10m
1784663747	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	12 count/10m
1784658947	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	9 count/10m
1784656546	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	6 count/10m
1784655346	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	7 count/10m
1784654155	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	6 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)