K4LLE-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K4LLE-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1784695421	49 Pkts	47 Pkts	12 Pkts	30 C
1784691821	55 Pkts	51 Pkts	13 Pkts	31 C
1784688222	67 Pkts	65 Pkts	17 Pkts	31 C
1784684622	60 Pkts	58 Pkts	15 Pkts	31 C
1784681022	84 Pkts	83 Pkts	36 Pkts	32 C
1784677421	66 Pkts	65 Pkts	32 Pkts	32 C
1784673821	71 Pkts	70 Pkts	33 Pkts	33 C
1784670221	68 Pkts	68 Pkts	36 Pkts	32 C
1784666621	64 Pkts	62 Pkts	12 Pkts	32 C
1784663021	50 Pkts	49 Pkts	26 Pkts	32 C
1784659421	31 Pkts	28 Pkts	9 Pkts	31 C
1784655821	41 Pkts	41 Pkts	9 Pkts	31 C
1784652221	57 Pkts	54 Pkts	19 Pkts	31 C
1784648621	76 Pkts	70 Pkts	18 Pkts	30 C
1784645021	112 Pkts	108 Pkts	44 Pkts	30 C
1784641421	76 Pkts	74 Pkts	13 Pkts	29 C
1784637822	88 Pkts	82 Pkts	24 Pkts	28 C
1784634043	67 Pkts	65 Pkts	18 Pkts	28 C
1784630443	65 Pkts	60 Pkts	12 Pkts	28 C
1784626843	75 Pkts	71 Pkts	17 Pkts	29 C
1784623243	64 Pkts	60 Pkts	14 Pkts	29 C
1784619643	44 Pkts	42 Pkts	9 Pkts	29 C
1784616043	59 Pkts	53 Pkts	10 Pkts	29 C
1784612443	84 Pkts	78 Pkts	14 Pkts	30 C
1784608843	65 Pkts	64 Pkts	16 Pkts	30 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)