This is the latest recevied telemetry packets stored in our database for station/object OZ1VJO-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1780565122
0 hPa
0 C deg
0 %
0 hPa
23.8 C deg
1780563305
0 hPa
0 C deg
0 %
0 hPa
23.5 C deg
1780561488
0 hPa
0 C deg
0 %
0 hPa
23.6 C deg
1780559674
0 hPa
0 C deg
0 %
0 hPa
23.2 C deg
1780554230
0 hPa
0 C deg
0 %
0 hPa
23.2 C deg
1780552414
0 hPa
0 C deg
0 %
0 hPa
22.9 C deg
1780550598
0 hPa
0 C deg
0 %
0 hPa
22.1 C deg
1780391633
0 hPa
0 C deg
0 %
0 hPa
22.9 C deg
1780386193
0 hPa
0 C deg
0 %
0 hPa
22.5 C deg
1780384374
0 hPa
0 C deg
0 %
0 hPa
22.4 C deg
1780382564
0 hPa
0 C deg
0 %
0 hPa
21.8 C deg
1780338232
0 hPa
0 C deg
0 %
0 hPa
22.6 C deg
1780336416
0 hPa
0 C deg
0 %
0 hPa
22.6 C deg
1780334598
0 hPa
0 C deg
0 %
0 hPa
22.5 C deg
1780333718
0 hPa
0 C deg
0 %
0 hPa
22.2 C deg
1780300443
0 hPa
0 C deg
0 %
0 hPa
21.9 C deg
1780298624
0 hPa
0 C deg
0 %
0 hPa
21.8 C deg
1780296812
0 hPa
0 C deg
0 %
0 hPa
21.6 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)