This is the latest recevied telemetry packets stored in our database for station/object OZ5SK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1776672348
0 hPa
0 C deg
57.9 %
0 hPa
19.7 C deg
1776434543
0 hPa
0 C deg
62.8 %
0 hPa
19.5 C deg
1776341269
0 hPa
0 C deg
55.4 %
0 hPa
20.1 C deg
1776339457
0 hPa
0 C deg
55 %
0 hPa
19.9 C deg
1776337641
0 hPa
0 C deg
55.1 %
0 hPa
19.8 C deg
1776334011
0 hPa
0 C deg
54.5 %
0 hPa
19.7 C deg
1776332195
0 hPa
0 C deg
54.7 %
0 hPa
19.6 C deg
1776331748
0 hPa
0 C deg
54.7 %
0 hPa
19.6 C deg
1776248704
0 hPa
0 C deg
54.5 %
0 hPa
19.8 C deg
1776248033
0 hPa
0 C deg
54.4 %
0 hPa
19.8 C deg
1776247976
0 hPa
0 C deg
54.4 %
0 hPa
19.8 C deg
1776243256
0 hPa
0 C deg
54.1 %
0 hPa
19.8 C deg
1776241443
0 hPa
0 C deg
54.4 %
0 hPa
19.8 C deg
1776241069
0 hPa
0 C deg
54.4 %
0 hPa
19.8 C deg
1776239131
0 hPa
0 C deg
54.4 %
0 hPa
19.8 C deg
1776239098
0 hPa
0 C deg
54.4 %
0 hPa
19.8 C deg
1776237826
0 hPa
0 C deg
54.4 %
0 hPa
19.8 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)