This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Celsius*
Rel_Hum*
Atm_Press*
Value4*
Value5*
1784543154
35 C
29.4 %
1024.5 hPa
0
0
1784539819
35 C
31.05 %
1024.5 hPa
0
0
1784530789
34.4 C
30.92 %
1024.5 hPa
0
0
1784521731
30.7 C
35.89 %
1025.5 hPa
0
0
1784512701
32.2 C
33.12 %
1023 hPa
0
0
1784505076
33.4 C
31.83 %
1023.75 hPa
0
0
1784496046
34.8 C
33.56 %
1023.75 hPa
0
0
1784491383
35 C
29.62 %
1022.63 hPa
0
0
1784491127
34.5 C
32.34 %
1023.88 hPa
0
0
1784489399
35.3 C
26.45 %
1021.63 hPa
0
0
1784489000
35.6 C
26.17 %
1019.88 hPa
0
0
1784485690
34.5 C
50.69 %
1015.5 hPa
0
0
1784484707
34.9 C
42.31 %
1012.63 hPa
0
0
1784474758
42.2 C
25.18 %
1010.5 hPa
0
0
1784458085
50 C
15.19 %
1016.38 hPa
0
0
1784457783
48.4 C
19.61 %
1019.75 hPa
0
0
1784454629
45 C
11.18 %
1018.88 hPa
0
0
1784454214
51.2 C
9.65 %
1022.63 hPa
0
0
1784453518
46.3 C
16.02 %
1020.88 hPa
0
0
1784453269
45.7 C
17.54 %
1020.75 hPa
0
0
1784452742
41.9 C
21.69 %
1020.63 hPa
0
0
1784452109
36.9 C
30.25 %
1020.25 hPa
0
0
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)