IU7URP-30 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU7URP-30. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1777618728	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777616927	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777615127	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777613327	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777611526	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777609726	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777607926	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777606126	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777600726	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777598929	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777597124	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777595324	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777593524	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777591724	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777589924	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777588124	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777586324	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777584524	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777582723	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777580923	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777579124	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777526530	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777524805	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777524619	0 Count	0 Count	0 Count	0 VDC	0 VDC
1777524516	0 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)