YC0ASW-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC0ASW-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp.*	Humidity*	Pressure*
1784686006	34 °C	37 %RH	1012 hPa
1784684406	34 °C	36 %RH	1012 hPa
1784683606	34 °C	36 %RH	1012 hPa
1784682806	34 °C	36 %RH	1012 hPa
1784682006	34 °C	37 %RH	1012 hPa
1784681206	34 °C	36 %RH	1012 hPa
1784680406	33 °C	37 %RH	1012 hPa
1784679606	33 °C	37 %RH	1012 hPa
1784678806	33 °C	38 %RH	1012 hPa
1784678006	33 °C	37 %RH	1012 hPa
1784677206	33 °C	38 %RH	1011 hPa
1784676406	33 °C	39 %RH	1011 hPa
1784675606	33 °C	39 %RH	1011 hPa
1784674806	34 °C	39 %RH	1011 hPa
1784674006	34 °C	40 %RH	1011 hPa
1784673211	34 °C	40 %RH	1011 hPa
1784672406	34 °C	40 %RH	1011 hPa
1784671606	34 °C	40 %RH	1011 hPa
1784670806	34 °C	41 %RH	1011 hPa
1784670006	34 °C	41 %RH	1011 hPa
1784669206	34 °C	41 %RH	1011 hPa
1784668406	34 °C	41 %RH	1011 hPa
1784667606	34 °C	41 %RH	1011 hPa
1784666806	34 °C	41 %RH	1011 hPa
1784666006	34 °C	42 %RH	1011 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Voltage: 0, 1, 0

Current: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)