PY2TGD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY2TGD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	Uptime*	Injected*
1785322262	51 degC	0 days	860 pkt
1785318622	51 degC	0 days	840 pkt
1785318451	49.5 degC	2 days	840 pkt
1785314848	49.5 degC	2 days	840 pkt
1785311244	51 degC	2 days	840 pkt
1785307641	51 degC	2 days	840 pkt
1785304037	52.5 degC	2 days	840 pkt
1785300433	51 degC	2 days	840 pkt
1785296830	53 degC	2 days	830 pkt
1785293226	55.5 degC	2 days	830 pkt
1785289623	54 degC	2 days	830 pkt
1785286020	52.5 degC	2 days	830 pkt
1785282416	53.5 degC	1 days	830 pkt
1785278813	53.5 degC	1 days	830 pkt
1785275209	55 degC	1 days	800 pkt
1785271606	54 degC	1 days	800 pkt
1785268003	53.5 degC	1 days	800 pkt
1785264399	54.5 degC	1 days	800 pkt
1785260796	56 degC	1 days	800 pkt
1785257192	55.5 degC	1 days	800 pkt
1785253589	53 degC	1 days	800 pkt
1785249986	54 degC	1 days	800 pkt
1785246383	53.5 degC	1 days	800 pkt
1785242779	54 degC	1 days	800 pkt
1785239166	52 degC	1 days	800 pkt

*Used Equation Coefficients:

CPUTemp: 0, 0.5, 0

Uptime: 0, 1, 0

Injected: 0, 10, 0

InjRate: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)