SQ5RJA-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5RJA-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Temperatura CPU*	Obciazenie CPU*
1776865801	45 Deg.C	1 %
1776865202	44 Deg.C	1 %
1776864606	42 Deg.C	1 %
1776864001	42 Deg.C	1 %
1776863405	43 Deg.C	1 %
1776862802	42 Deg.C	1 %
1776862206	43 Deg.C	1 %
1776861602	42 Deg.C	1 %
1776861001	42 Deg.C	1 %
1776860406	42 Deg.C	1 %
1776859876	43 Deg.C	1 %
1776859802	43 Deg.C	1 %
1776859205	42 Deg.C	1 %
1776858602	43 Deg.C	1 %
1776858006	42 Deg.C	1 %
1776857402	42 Deg.C	1 %
1776856805	42 Deg.C	1 %
1776856201	42 Deg.C	1 %
1776855605	41 Deg.C	1 %
1776855002	41 Deg.C	2 %
1776854422	41 Deg.C	5 %
1776854405	41 Deg.C	5 %
1776853992	42 Deg.C	2 %
1776853866	41 Deg.C	2 %
1776853801	41 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)