KU1F-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KU1F-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1787570363	158 Pkts	156 Pkts	34 Pkts	5 C
1787566763	174 Pkts	172 Pkts	35 Pkts	5 C
1787563164	184 Pkts	181 Pkts	38 Pkts	5 C
1787559564	258 Pkts	256 Pkts	39 Pkts	6 C
1787555964	236 Pkts	234 Pkts	37 Pkts	6 C
1787552363	193 Pkts	191 Pkts	38 Pkts	6 C
1787548763	200 Pkts	197 Pkts	36 Pkts	6 C
1787545163	201 Pkts	198 Pkts	39 Pkts	7 C
1787541564	180 Pkts	177 Pkts	30 Pkts	7 C
1787537964	186 Pkts	183 Pkts	30 Pkts	7 C
1787534364	195 Pkts	192 Pkts	36 Pkts	7 C
1787530763	212 Pkts	210 Pkts	38 Pkts	7 C
1787527219	292 Pkts	287 Pkts	44 Pkts	7 C
1787523563	281 Pkts	278 Pkts	40 Pkts	7 C
1787519963	326 Pkts	321 Pkts	32 Pkts	6 C
1787516363	234 Pkts	227 Pkts	43 Pkts	6 C
1787512763	205 Pkts	202 Pkts	34 Pkts	5 C
1787509163	223 Pkts	218 Pkts	44 Pkts	5 C
1787505563	209 Pkts	205 Pkts	38 Pkts	5 C
1787501963	210 Pkts	207 Pkts	38 Pkts	5 C
1787498363	202 Pkts	198 Pkts	39 Pkts	5 C
1787494763	199 Pkts	196 Pkts	37 Pkts	4 C
1787491163	188 Pkts	186 Pkts	39 Pkts	5 C
1787487563	208 Pkts	205 Pkts	38 Pkts	5 C
1787483963	206 Pkts	202 Pkts	37 Pkts	5 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)