YE2YE-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YE2YE-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Pressure*
1781419725	29 °C	42 %RH	1001 hPa
1781417925	29 °C	43 %RH	1001 hPa
1781416125	29 °C	43 %RH	1001 hPa
1781414325	29 °C	45 %RH	1002 hPa
1781412525	29 °C	45 %RH	1002 hPa
1781410725	29 °C	46 %RH	1003 hPa
1781408925	29 °C	50 %RH	1003 hPa
1781407125	29 °C	50 %RH	1003 hPa
1781405325	29 °C	53 %RH	1004 hPa
1781403525	30 °C	54 %RH	1004 hPa
1781401725	29 °C	54 %RH	1004 hPa
1781399925	30 °C	55 %RH	1004 hPa
1781398125	30 °C	56 %RH	1004 hPa
1781396329	30 °C	57 %RH	1003 hPa
1781394529	30 °C	57 %RH	1003 hPa
1781392729	30 °C	55 %RH	1003 hPa
1781390925	30 °C	56 %RH	1003 hPa
1781389125	30 °C	57 %RH	1002 hPa
1781387325	30 °C	57 %RH	1002 hPa
1781385525	30 °C	54 %RH	1002 hPa
1781383725	30 °C	56 %RH	1002 hPa
1781382536	30 °C	55 %RH	1002 hPa
1781380736	30 °C	56 %RH	1002 hPa
1781378936	30 °C	56 %RH	1002 hPa
1781377136	30 °C	54 %RH	1003 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)