ON0DV-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0DV-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1784764072	0 Count	832 Count	0 Count	0 VDC	0 VDC
1784761372	0 Count	831 Count	0 Count	0 VDC	0 VDC
1784758672	0 Count	829 Count	0 Count	0 VDC	0 VDC
1784755972	0 Count	828 Count	0 Count	0 VDC	0 VDC
1784753283	0 Count	827 Count	0 Count	0 VDC	0 VDC
1784750571	0 Count	827 Count	0 Count	0 VDC	0 VDC
1784747871	0 Count	826 Count	0 Count	0 VDC	0 VDC
1784745171	0 Count	825 Count	0 Count	0 VDC	0 VDC
1784742471	0 Count	823 Count	0 Count	0 VDC	0 VDC
1784739771	0 Count	817 Count	0 Count	0 VDC	0 VDC
1784737071	0 Count	812 Count	0 Count	0 VDC	0 VDC
1784734371	0 Count	810 Count	0 Count	0 VDC	0 VDC
1784731671	0 Count	809 Count	0 Count	0 VDC	0 VDC
1784728971	0 Count	808 Count	0 Count	0 VDC	0 VDC
1784726271	0 Count	806 Count	0 Count	0 VDC	0 VDC
1784707372	0 Count	801 Count	0 Count	0 VDC	0 VDC
1784704672	0 Count	795 Count	0 Count	0 VDC	0 VDC
1784701970	0 Count	794 Count	0 Count	0 VDC	0 VDC
1784699270	0 Count	793 Count	0 Count	0 VDC	0 VDC
1784696593	0 Count	792 Count	0 Count	0 VDC	0 VDC
1784693870	0 Count	791 Count	0 Count	0 VDC	0 VDC
1784691170	0 Count	790 Count	0 Count	0 VDC	0 VDC
1784688470	0 Count	788 Count	0 Count	0 VDC	0 VDC
1784685770	0 Count	787 Count	0 Count	0 VDC	0 VDC
1784683070	0 Count	785 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)