HP1VS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1VS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1787624256	14.54 Volt	100 Pkt	30 Pkt	54 Pcnt
1787623656	14.54 Volt	110 Pkt	30 Pkt	58 Pcnt
1787623057	14.54 Volt	120 Pkt	40 Pkt	59 Pcnt
1787622457	14.54 Volt	130 Pkt	40 Pkt	61 Pcnt
1787621857	14.46 Volt	120 Pkt	30 Pkt	64 Pcnt
1787621257	14.54 Volt	130 Pkt	40 Pkt	63 Pcnt
1787620657	14.54 Volt	130 Pkt	40 Pkt	61 Pcnt
1787620057	14.54 Volt	130 Pkt	40 Pkt	60 Pcnt
1787619457	14.54 Volt	140 Pkt	40 Pkt	60 Pcnt
1787618857	14.46 Volt	140 Pkt	40 Pkt	62 Pcnt
1787618257	14.46 Volt	140 Pkt	40 Pkt	60 Pcnt
1787617657	14.46 Volt	140 Pkt	40 Pkt	60 Pcnt
1787617057	14.46 Volt	130 Pkt	30 Pkt	60 Pcnt
1787616457	14.46 Volt	110 Pkt	30 Pkt	58 Pcnt
1787615857	14.46 Volt	120 Pkt	40 Pkt	56 Pcnt
1787615257	14.54 Volt	120 Pkt	40 Pkt	56 Pcnt
1787614657	14.46 Volt	130 Pkt	40 Pkt	56 Pcnt
1787614057	14.46 Volt	130 Pkt	40 Pkt	57 Pcnt
1787613457	14.46 Volt	130 Pkt	40 Pkt	57 Pcnt
1787612857	14.46 Volt	130 Pkt	40 Pkt	56 Pcnt
1787612257	14.46 Volt	120 Pkt	40 Pkt	54 Pcnt
1787611657	14.46 Volt	110 Pkt	40 Pkt	52 Pcnt
1787611057	14.46 Volt	100 Pkt	30 Pkt	49 Pcnt
1787610457	14.46 Volt	100 Pkt	40 Pkt	48 Pcnt
1787609857	14.46 Volt	100 Pkt	40 Pkt	47 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)