VK2RBE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RBE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Core*	Room*	Battery*
1789960677	13.6 VDC	48.3 degC	25.8 degC	22.3 degC
1789957078	13.7 VDC	47.8 degC	25.5 degC	21.9 degC
1789953480	13.6 VDC	47.2 degC	24.6 degC	21.4 degC
1789949881	13.7 VDC	46.2 degC	23.6 degC	20.9 degC
1789946284	13.6 VDC	45.1 degC	22.2 degC	20.4 degC
1789942685	13.6 VDC	44.5 degC	21.1 degC	20 degC
1789939087	14.4 VDC	43.5 degC	19.8 degC	19.6 degC
1789935489	12.7 VDC	42.9 degC	19.6 degC	19.8 degC
1789931891	12.6 VDC	44 degC	20.3 degC	20.3 degC
1789928292	12.6 VDC	44 degC	21 degC	20.8 degC
1789924694	12.6 VDC	45.1 degC	21.7 degC	21.2 degC
1789921096	12.6 VDC	45.6 degC	22.4 degC	21.7 degC
1789917497	12.6 VDC	46.2 degC	23.3 degC	22.2 degC
1789913902	12.7 VDC	47.2 degC	23.5 degC	22.4 degC
1789910301	12.7 VDC	46.2 degC	23.7 degC	22.5 degC
1789906704	12.7 VDC	47.2 degC	24.1 degC	22.8 degC
1789903105	12.7 VDC	47.8 degC	24.5 degC	22.9 degC
1789899507	12.7 VDC	48.3 degC	25.1 degC	23.3 degC
1789895909	12.8 VDC	49.4 degC	26.1 degC	23.7 degC
1789892310	12.8 VDC	50.5 degC	27.4 degC	24.2 degC
1789888712	13 VDC	51.5 degC	28.6 degC	24.8 degC
1789885118	13.7 VDC	52.6 degC	29.6 degC	25 degC
1789881517	13.7 VDC	52.6 degC	30.2 degC	24.9 degC
1789877918	13.7 VDC	53.2 degC	30.5 degC	24.8 degC
1789874319	13.7 VDC	53.2 degC	30.4 degC	24.4 degC

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Core: 0, 0.1, 0

Room: 0, 0.1, 0

Battery: 0, 0.1, 0

Tx: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)