VK4RHR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RHR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Rx1h*	DeEff%*	RXpkt*
1761491991	44.5 C	13.2 Volt	25 Pkt	89 pkt	31 Spam
1761487492	29.5 C	13.2 Volt	24 Pkt	75 pkt	34 Spam
1761480289	32.5 C	12.9 Volt	28 Pkt	86 pkt	46 Spam
1761477588	34 C	13.2 Volt	27 Pkt	87 pkt	49 Spam
1761476688	34.5 C	13.13 Volt	28 Pkt	84 pkt	44 Spam
1761475788	35 C	13.2 Volt	27 Pkt	85 pkt	42 Spam
1761473090	35.5 C	12.75 Volt	28 Pkt	75 pkt	33 Spam
1761467690	38 C	13.2 Volt	30 Pkt	93 pkt	48 Spam
1761465893	39.5 C	13.2 Volt	26 Pkt	90 pkt	51 Spam
1761464088	40 C	13.2 Volt	26 Pkt	90 pkt	37 Spam
1761463188	40.5 C	13.28 Volt	28 Pkt	91 pkt	32 Spam
1761460489	41 C	13.88 Volt	31 Pkt	91 pkt	51 Spam
1761459590	41 C	14.1 Volt	31 Pkt	91 pkt	48 Spam
1761456890	42 C	13.95 Volt	31 Pkt	91 pkt	51 Spam
1761454190	42 C	14.1 Volt	24 Pkt	92 pkt	60 Spam
1761453289	42 C	14.1 Volt	18 Pkt	92 pkt	47 Spam
1761449690	41 C	14.1 Volt	20 Pkt	88 pkt	11 Spam
1761448789	41 C	13.95 Volt	23 Pkt	86 pkt	24 Spam
1761447889	40.5 C	14.03 Volt	25 Pkt	85 pkt	22 Spam
1761446989	50.5 C	14.03 Volt	26 Pkt	85 pkt	46 Spam
1761445190	50.5 C	13.95 Volt	19 Pkt	87 pkt	37 Spam
1761444295	50 C	14.03 Volt	17 Pkt	89 pkt	45 Spam
1761443389	50 C	14.1 Volt	17 Pkt	90 pkt	26 Spam
1761442489	50 C	13.95 Volt	21 Pkt	92 pkt	0 Spam
1761441589	49.5 C	14.1 Volt	29 Pkt	92 pkt	27 Spam

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Rx1h: 0, 1, 0

DeEff%: 0, 1, 0

RXpkt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)