W7SAR-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W7SAR-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1787565327	12.42 Volts	75.37 Deg.F
1787564728	13.07 Volts	76.25 Deg.F
1787564128	12.63 Volts	76.25 Deg.F
1787563529	12.86 Volts	76.25 Deg.F
1787562929	12.42 Volts	77.13 Deg.F
1787562329	12.66 Volts	76.25 Deg.F
1787561807	12.42 Volts	77.13 Deg.F
1787560529	13.1 Volts	77.13 Deg.F
1787559928	12.45 Volts	78.01 Deg.F
1787559329	12.75 Volts	79.77 Deg.F
1787558729	12.69 Volts	78.89 Deg.F
1787558129	13.01 Volts	78.89 Deg.F
1787557529	12.45 Volts	78.89 Deg.F
1787557039	12.48 Volts	79.77 Deg.F
1787556329	12.42 Volts	79.77 Deg.F
1787555729	12.48 Volts	80.65 Deg.F
1787555130	12.45 Volts	80.65 Deg.F
1787554530	12.42 Volts	81.53 Deg.F
1787553926	12.51 Volts	81.53 Deg.F
1787553326	12.48 Volts	81.53 Deg.F
1787552126	12.45 Volts	81.53 Deg.F
1787551526	12.45 Volts	82.41 Deg.F
1787550926	12.45 Volts	82.41 Deg.F
1787550326	13.16 Volts	83.29 Deg.F
1787549726	12.45 Volts	83.29 Deg.F

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.88, -459.67

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)