This is the latest recevied telemetry packets stored in our database for station/object ED4ZAA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Vin*
Rx1h*
Dg1h*
Eff1h*
Temp*
1765468725
12.38 Volt
60 Pkt
30 Pkt
59 Pcnt
-62 ºC
1765461518
13.5 Volt
60 Pkt
30 Pkt
81 Pcnt
-62 ºC
1765457915
13.88 Volt
50 Pkt
30 Pkt
68 Pcnt
-62 ºC
1765454311
12.75 Volt
50 Pkt
30 Pkt
62 Pcnt
-62 ºC
1765294746
12.3 Volt
70 Pkt
40 Pkt
74 Pcnt
-62 ºC
1765291143
12.38 Volt
110 Pkt
60 Pkt
83 Pcnt
-62 ºC
1765280332
12.3 Volt
120 Pkt
90 Pkt
69 Pcnt
-62 ºC
1765215470
12.15 Volt
50 Pkt
30 Pkt
72 Pcnt
-62 ºC
1765201056
12.38 Volt
70 Pkt
40 Pkt
73 Pcnt
-62 ºC
1765197454
11.7 Volt
120 Pkt
50 Pkt
73 Pcnt
-62 ºC
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -62
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)