SP9JZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9JZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1779916874	262 Count	68 Count	2 Count	3.96 VDC	0.08 VDC
1779916353	261 Count	68 Count	2 Count	3.88 VDC	0.08 VDC
1779916275	260 Count	68 Count	2 Count	3.87 VDC	0.08 VDC
1779444197	259 Count	68 Count	2 Count	3.87 VDC	0.08 VDC
1779442396	258 Count	68 Count	2 Count	3.89 VDC	0.08 VDC
1779440594	257 Count	68 Count	2 Count	3.9 VDC	0.08 VDC
1779438792	256 Count	68 Count	2 Count	3.91 VDC	0.08 VDC
1779436991	255 Count	68 Count	2 Count	3.92 VDC	0.08 VDC
1779435189	254 Count	68 Count	2 Count	3.9 VDC	0.08 VDC
1779435151	253 Count	68 Count	2 Count	3.9 VDC	0.08 VDC
1779433650	252 Count	68 Count	2 Count	3.91 VDC	0.08 VDC
1779291488	251 Count	68 Count	2 Count	3.97 VDC	0.08 VDC
1779290214	250 Count	68 Count	2 Count	3.96 VDC	0.08 VDC
1779289269	249 Count	68 Count	2 Count	3.97 VDC	0.08 VDC
1779287467	248 Count	68 Count	2 Count	3.97 VDC	0.08 VDC
1779285666	247 Count	68 Count	2 Count	3.97 VDC	0.08 VDC
1779283864	246 Count	68 Count	2 Count	3.98 VDC	0.08 VDC
1779282062	245 Count	68 Count	2 Count	3.98 VDC	0.08 VDC
1779280260	244 Count	68 Count	2 Count	3.98 VDC	0.08 VDC
1779278458	243 Count	68 Count	2 Count	3.97 VDC	0.08 VDC
1779276656	242 Count	68 Count	2 Count	3.98 VDC	0.08 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)