SV0SYH-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV0SYH-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1782013478	34 Count	209 Count	32 Count	4.06 VDC
1782011673	23 Count	134 Count	22 Count	4.04 VDC
1782008067	150 Count	1038 Count	133 Count	4.06 VDC
1782006264	138 Count	969 Count	122 Count	4.06 VDC
1782004461	128 Count	901 Count	113 Count	4.06 VDC
1782002658	115 Count	834 Count	101 Count	4.05 VDC
1782000855	104 Count	770 Count	91 Count	4.07 VDC
1781999052	91 Count	707 Count	79 Count	4.07 VDC
1781993677	57 Count	514 Count	52 Count	4.08 VDC
1781991873	49 Count	439 Count	45 Count	4.08 VDC
1781990071	38 Count	349 Count	35 Count	4.07 VDC
1781986464	19 Count	176 Count	18 Count	4.08 VDC
1781984662	6 Count	66 Count	6 Count	4.09 VDC
1781982858	111 Count	1038 Count	97 Count	4.09 VDC
1781981056	98 Count	953 Count	85 Count	4.1 VDC
1781979252	91 Count	882 Count	79 Count	4.11 VDC
1781977454	83 Count	818 Count	72 Count	4.11 VDC
1781973885	61 Count	622 Count	56 Count	4.11 VDC
1781972075	52 Count	552 Count	48 Count	4.12 VDC
1781964862	8 Count	123 Count	8 Count	4.2 VDC
1781959453	98 Count	891 Count	85 Count	4.13 VDC
1781957650	86 Count	801 Count	74 Count	4.13 VDC
1781955854	73 Count	728 Count	62 Count	4.12 VDC
1781950479	46 Count	384 Count	42 Count	4.07 VDC
1781946873	26 Count	220 Count	24 Count	4.05 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)