YU5MOL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YU5MOL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1778675396	949.8 hPa	39.1 C deg	17.3 %	27 -	0 C deg
1778673581	949.7 hPa	37 C deg	19.3 %	30 -	0 C deg
1778673154	950 hPa	37.1 C deg	17.8 %	32 -	0 C deg
1778672484	950 hPa	35.2 C deg	20 %	33 -	0 C deg
1778670669	950.6 hPa	33.4 C deg	24 %	32 -	0 C deg
1778668854	951.6 hPa	26.2 C deg	26.5 %	42 -	0 C deg
1778667038	952.2 hPa	25.1 C deg	28.3 %	36 -	0 C deg
1778665223	952.6 hPa	25.2 C deg	41.5 %	22 -	0 C deg
1778663408	952.8 hPa	24.1 C deg	34 %	31 -	0 C deg
1778661593	953.3 hPa	23.5 C deg	35.1 %	31 -	0 C deg
1778659778	953.6 hPa	22.7 C deg	36.6 %	32 -	0 C deg
1778658759	953.9 hPa	22.6 C deg	36.8 %	32 -	0 C deg
1778656944	954.4 hPa	22.3 C deg	37.4 %	32 -	0 C deg
1778655128	954.7 hPa	21.8 C deg	38.5 %	32 -	0 C deg
1778653313	955 hPa	21.7 C deg	38.6 %	31 -	0 C deg
1778651498	955.1 hPa	21.4 C deg	36.6 %	34 -	0 C deg
1778649683	955.3 hPa	21.2 C deg	37 %	34 -	0 C deg
1778647868	955.3 hPa	21.1 C deg	38 %	32 -	0 C deg
1778647660	955.3 hPa	21.1 C deg	38.3 %	32 -	0 C deg
1778647569	955.3 hPa	21.1 C deg	38.3 %	32 -	0 C deg
1778647421	955.4 hPa	21.1 C deg	38.4 %	32 -	0 C deg
1778646929	955.4 hPa	21 C deg	38.5 %	32 -	0 C deg
1778646257	955.3 hPa	20.9 C deg	38.8 %	32 -	0 C deg
1778644442	955.3 hPa	20.8 C deg	38.7 %	33 -	0 C deg
1778642627	955.2 hPa	20.7 C deg	38.2 %	34 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)