KC9PXI-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC9PXI-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788575914	12.09 Volt	250 Pkt	110 Pkt	72 Pcnt
1788575913	12.09 Volt	250 Pkt	110 Pkt	72 Pcnt
1788574714	12.17 Volt	250 Pkt	140 Pkt	67 Pcnt
1788574713	12.17 Volt	250 Pkt	140 Pkt	67 Pcnt
1788573514	12.09 Volt	250 Pkt	140 Pkt	65 Pcnt
1788573513	12.09 Volt	250 Pkt	140 Pkt	65 Pcnt
1788572314	12.17 Volt	250 Pkt	150 Pkt	69 Pcnt
1788572313	12.17 Volt	250 Pkt	150 Pkt	69 Pcnt
1788571114	12.17 Volt	220 Pkt	120 Pkt	66 Pcnt
1788571113	12.17 Volt	220 Pkt	120 Pkt	66 Pcnt
1788569914	12.17 Volt	240 Pkt	140 Pkt	70 Pcnt
1788569913	12.17 Volt	240 Pkt	140 Pkt	70 Pcnt
1788568714	12.17 Volt	300 Pkt	160 Pkt	74 Pcnt
1788568713	12.17 Volt	300 Pkt	160 Pkt	74 Pcnt
1788567514	12.17 Volt	340 Pkt	180 Pkt	80 Pcnt
1788567513	12.17 Volt	340 Pkt	180 Pkt	80 Pcnt
1788566314	12.09 Volt	320 Pkt	160 Pkt	81 Pcnt
1788566313	12.09 Volt	320 Pkt	160 Pkt	81 Pcnt
1788565114	12.17 Volt	240 Pkt	130 Pkt	77 Pcnt
1788565113	12.17 Volt	240 Pkt	130 Pkt	77 Pcnt
1788563914	12.17 Volt	230 Pkt	130 Pkt	76 Pcnt
1788563914	12.17 Volt	230 Pkt	130 Pkt	76 Pcnt
1788562714	12.17 Volt	200 Pkt	120 Pkt	74 Pcnt
1788562714	12.17 Volt	200 Pkt	120 Pkt	74 Pcnt
1788561514	12.17 Volt	190 Pkt	100 Pkt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)