S56IAR-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S56IAR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Satelites*	Battery*
1780524062	16 Nr	12.89 Vdc
1780523762	15 Nr	12.89 Vdc
1780523462	15 Nr	12.89 Vdc
1780523162	15 Nr	12.89 Vdc
1780522862	16 Nr	12.89 Vdc
1780522562	16 Nr	12.89 Vdc
1780522262	17 Nr	12.89 Vdc
1780521962	18 Nr	12.89 Vdc
1780521662	18 Nr	12.89 Vdc
1780521362	18 Nr	12.89 Vdc
1780521062	17 Nr	12.89 Vdc
1780520762	17 Nr	12.89 Vdc
1780520462	17 Nr	12.89 Vdc
1780520162	17 Nr	12.89 Vdc
1780519862	17 Nr	12.89 Vdc
1780519562	16 Nr	12.89 Vdc
1780519262	16 Nr	12.89 Vdc
1780518962	16 Nr	12.89 Vdc
1780518662	14 Nr	12.89 Vdc
1780518362	15 Nr	12.89 Vdc
1780518062	15 Nr	12.89 Vdc
1780517762	16 Nr	12.89 Vdc
1780517462	16 Nr	12.89 Vdc
1780517162	16 Nr	12.89 Vdc
1780516862	17 Nr	12.89 Vdc

*Used Equation Coefficients:

Satelites: 0, 1, 0

Battery: 0, 0.01, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)