HS1ZHY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS1ZHY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1780603451	21 Pkt	0 Pkt	0 Pkt	-33 dBm	13.72 V
1780602527	15 Pkt	0 Pkt	0 Pkt	-33 dBm	14.05 V
1780601602	13 Pkt	0 Pkt	0 Pkt	-33 dBm	13.7 V
1780600678	13 Pkt	0 Pkt	0 Pkt	-33 dBm	13.7 V
1780599753	17 Pkt	0 Pkt	0 Pkt	-33 dBm	13.15 V
1780598827	16 Pkt	0 Pkt	1 Pkt	-33 dBm	14.07 V
1780597902	9 Pkt	0 Pkt	0 Pkt	-32 dBm	12.98 V
1780596977	19 Pkt	0 Pkt	0 Pkt	-32 dBm	12.8 V
1780596052	8 Pkt	0 Pkt	0 Pkt	-35 dBm	13.54 V
1780595127	8 Pkt	0 Pkt	0 Pkt	-34 dBm	13.58 V
1780594202	10 Pkt	0 Pkt	0 Pkt	-32 dBm	13.04 V
1780593277	20 Pkt	0 Pkt	0 Pkt	-32 dBm	13.04 V
1780592351	14 Pkt	0 Pkt	0 Pkt	-32 dBm	12.63 V
1780591426	10 Pkt	0 Pkt	0 Pkt	-32 dBm	13.99 V
1780590501	12 Pkt	0 Pkt	0 Pkt	-32 dBm	13.78 V
1780589577	17 Pkt	0 Pkt	0 Pkt	-31 dBm	13 V
1780588650	21 Pkt	0 Pkt	0 Pkt	-32 dBm	13.82 V
1780587725	12 Pkt	1 Pkt	1 Pkt	-32 dBm	13.15 V
1780586801	7 Pkt	0 Pkt	0 Pkt	-33 dBm	12.86 V
1780585876	8 Pkt	0 Pkt	0 Pkt	-33 dBm	12.86 V
1780584952	9 Pkt	0 Pkt	0 Pkt	-39 dBm	13.19 V
1780584027	8 Pkt	0 Pkt	0 Pkt	-32 dBm	13.29 V
1780583102	6 Pkt	0 Pkt	0 Pkt	-33 dBm	13.08 V
1780582177	10 Pkt	0 Pkt	0 Pkt	-33 dBm	14.17 V
1780581252	9 Pkt	1 Pkt	1 Pkt	-32 dBm	13.41 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)