DL3FRE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL3FRE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1778770081	993.1 hPa	26.5 C deg	1001.4 hPa	0 C deg
1778769290	992.8 hPa	28.5 C deg	1001 hPa	0 C deg
1778768266	992.3 hPa	30 C deg	1000.5 hPa	0 C deg
1778766451	992.4 hPa	30.2 C deg	1000.5 hPa	0 C deg
1778764635	992.4 hPa	28 C deg	1000.7 hPa	0 C deg
1778762820	992.5 hPa	27.7 C deg	1000.7 hPa	0 C deg
1778761005	992.6 hPa	27.6 C deg	1000.8 hPa	0 C deg
1778759317	992.2 hPa	23.6 C deg	1000.6 hPa	0 C deg
1778757502	992.1 hPa	23.5 C deg	1000.5 hPa	0 C deg
1778755687	992.1 hPa	23.5 C deg	1000.5 hPa	0 C deg
1778753872	992.1 hPa	23.4 C deg	1000.5 hPa	0 C deg
1778752057	992.3 hPa	23.4 C deg	1000.7 hPa	0 C deg
1778750242	992.1 hPa	23.2 C deg	1000.5 hPa	0 C deg
1778748427	992.2 hPa	23 C deg	1000.6 hPa	0 C deg
1778746612	992.1 hPa	22.8 C deg	1000.5 hPa	0 C deg
1778744797	992 hPa	22.7 C deg	1000.4 hPa	0 C deg
1778742981	992.1 hPa	22.8 C deg	1000.5 hPa	0 C deg
1778742384	991.9 hPa	22.7 C deg	1000.3 hPa	0 C deg
1778740569	991.7 hPa	22.6 C deg	1000 hPa	0 C deg
1778738754	991.5 hPa	22.7 C deg	999.9 hPa	0 C deg
1778736939	991.4 hPa	22.5 C deg	999.8 hPa	0 C deg
1778735124	991.4 hPa	22.4 C deg	999.8 hPa	0 C deg
1778733309	991.4 hPa	22.6 C deg	999.8 hPa	0 C deg
1778731494	991.4 hPa	22.7 C deg	999.8 hPa	0 C deg
1778729679	991 hPa	22.9 C deg	999.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)