HS6KLJ-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	AllCount*	AllDrop*
1780578163	0 Pkts	0 Pkts	0 Pkts
1780578125	6 Pkts	8 Pkts	2 Pkts
1780577525	3 Pkts	4 Pkts	1 Pkts
1780576925	0 Pkts	0 Pkts	0 Pkts
1780576853	4 Pkts	5 Pkts	1 Pkts
1780576254	2 Pkts	2 Pkts	0 Pkts
1780575654	2 Pkts	3 Pkts	1 Pkts
1780575053	7 Pkts	9 Pkts	2 Pkts
1780574453	3 Pkts	3 Pkts	0 Pkts
1780573853	2 Pkts	3 Pkts	1 Pkts
1780573253	5 Pkts	6 Pkts	1 Pkts
1780572665	0 Pkts	0 Pkts	0 Pkts
1780572615	2 Pkts	3 Pkts	1 Pkts
1780572015	3 Pkts	4 Pkts	1 Pkts
1780571415	0 Pkts	0 Pkts	0 Pkts
1780571332	7 Pkts	9 Pkts	2 Pkts
1780570732	2 Pkts	2 Pkts	0 Pkts
1780570135	3 Pkts	4 Pkts	1 Pkts
1780569532	4 Pkts	5 Pkts	1 Pkts
1780568932	3 Pkts	4 Pkts	1 Pkts
1780568332	0 Pkts	0 Pkts	0 Pkts
1780568294	3 Pkts	4 Pkts	1 Pkts
1780567694	6 Pkts	8 Pkts	2 Pkts
1780567094	0 Pkts	0 Pkts	0 Pkts
1780567029	3 Pkts	4 Pkts	1 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)