This is the latest recevied telemetry packets stored in our database for station/object WB5PKK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Vin*
Rx1h*
Dg1h*
Eff1h*
Temp*
1780232754
13.2 Volt
510 Pkt
110 Pkt
49 Pcnt
22.5 C
1780232454
13.2 Volt
560 Pkt
120 Pkt
51 Pcnt
22 C
1780232155
13.2 Volt
580 Pkt
120 Pkt
51 Pcnt
22 C
1780232154
13.2 Volt
580 Pkt
120 Pkt
51 Pcnt
22 C
1780231854
13.2 Volt
590 Pkt
120 Pkt
52 Pcnt
22.5 C
1780231554
13.2 Volt
610 Pkt
130 Pkt
53 Pcnt
22.5 C
1780231254
13.2 Volt
650 Pkt
130 Pkt
57 Pcnt
22 C
1780230954
13.2 Volt
690 Pkt
140 Pkt
60 Pcnt
22 C
1780230654
13.2 Volt
740 Pkt
140 Pkt
64 Pcnt
21.5 C
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -64
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)