HAYDN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HAYDN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Eff1h*	Solar*	Batt*	Bldg*	Vin*
1765867435	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765867434	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765867134	75 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765866835	75 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765866834	75 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765866534	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765866235	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765866234	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765865935	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765865635	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765865634	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765865335	75 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765865035	77 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765865034	77 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765864734	78 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765864435	79 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765864434	79 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765864135	79 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765863835	77 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765863835	77 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765863535	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765863235	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765863235	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765862935	76 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt
1765862635	75 Pcnt	0.6 Volt	12.64 Volt	32 Deg F	12.64 Volt

*Used Equation Coefficients:

Eff1h: 0, 1, 0

Solar: 0, 1.65, -2.7

Batt: 0, 0.079, 0

Bldg: 0, 0.9, -83.2

Vin: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)