K7MXE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K7MXE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1788615286	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	4 count/10m
1788614086	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	4 count/10m
1788612886	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788611686	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788610486	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	4 count/10m
1788609286	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788608086	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788606886	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	4 count/10m
1788605686	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788604486	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	4 count/10m
1788603286	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	4 count/10m
1788602086	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	4 count/10m
1788600886	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	4 count/10m
1788599686	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	4 count/10m
1788598486	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	4 count/10m
1788597286	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788596086	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	4 count/10m
1788594886	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788593686	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	5 count/10m
1788592486	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788591286	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788590086	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1788588886	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	4 count/10m
1788587686	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	4 count/10m	5 count/10m
1788586486	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)