This is the latest recevied telemetry packets stored in our database for station/object IZ5WWB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1780766632
1014.3 hPa
32.5 C deg
33 %
1022.7 hPa
0 C deg
1780755740
1014.3 hPa
32.5 C deg
33 %
1022.7 hPa
0 C deg
1780752114
1014.3 hPa
32.5 C deg
33 %
1022.7 hPa
0 C deg
1780750295
1014.3 hPa
32.5 C deg
33 %
1022.7 hPa
0 C deg
1780744850
1014.3 hPa
32.5 C deg
33 %
1022.7 hPa
0 C deg
1780709332
1012.4 hPa
23.5 C deg
51 %
1021 hPa
0 C deg
1780705699
1012.1 hPa
23.8 C deg
50.3 %
1020.7 hPa
0 C deg
1780700258
1012 hPa
25 C deg
46.9 %
1020.6 hPa
0 C deg
1780693000
1011.7 hPa
26.7 C deg
42.4 %
1020.3 hPa
0 C deg
1780691181
1011.7 hPa
27.4 C deg
41.1 %
1020.2 hPa
0 C deg
1780687548
1011.2 hPa
27.3 C deg
40.6 %
1019.7 hPa
0 C deg
1780685737
1010.9 hPa
27.8 C deg
39.8 %
1019.4 hPa
0 C deg
1780683920
1010.7 hPa
30.1 C deg
35.6 %
1019.2 hPa
0 C deg
1780675067
1010 hPa
31.3 C deg
33.8 %
1018.4 hPa
0 C deg
1780673242
1010.1 hPa
31.6 C deg
31.5 %
1018.4 hPa
0 C deg
1780671428
1009.8 hPa
32.1 C deg
31.2 %
1018.2 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)