KL5EX-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KL5EX-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1785338184	72 Pkts	70 Pkts	34 Pkts	34 C
1785334584	74 Pkts	72 Pkts	28 Pkts	35 C
1785330984	65 Pkts	63 Pkts	30 Pkts	34 C
1785327384	60 Pkts	58 Pkts	28 Pkts	35 C
1785323784	62 Pkts	59 Pkts	26 Pkts	35 C
1785320184	59 Pkts	57 Pkts	28 Pkts	35 C
1785316585	65 Pkts	63 Pkts	32 Pkts	35 C
1785312985	77 Pkts	73 Pkts	32 Pkts	35 C
1785309385	72 Pkts	69 Pkts	30 Pkts	36 C
1785305784	65 Pkts	61 Pkts	31 Pkts	36 C
1785298584	66 Pkts	64 Pkts	31 Pkts	37 C
1785294985	79 Pkts	75 Pkts	33 Pkts	37 C
1785291385	71 Pkts	68 Pkts	31 Pkts	36 C
1785284184	85 Pkts	83 Pkts	37 Pkts	37 C
1785280584	86 Pkts	82 Pkts	40 Pkts	36 C
1785276984	81 Pkts	79 Pkts	36 Pkts	36 C
1785273384	145 Pkts	142 Pkts	73 Pkts	36 C
1785269784	112 Pkts	109 Pkts	55 Pkts	35 C
1785266184	70 Pkts	69 Pkts	29 Pkts	35 C
1785262584	65 Pkts	61 Pkts	26 Pkts	35 C
1785258984	52 Pkts	52 Pkts	27 Pkts	35 C
1785255383	84 Pkts	80 Pkts	41 Pkts	35 C
1785251783	81 Pkts	78 Pkts	36 Pkts	34 C
1785248183	65 Pkts	62 Pkts	27 Pkts	34 C
1785244583	57 Pkts	54 Pkts	25 Pkts	34 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)